Getting the Electronics to Work

After we got everything wired up with the Digitrax components we started to have several problems. When we moved the locomotives the sound would shut off and locomotives moved slower than I though they should.  We originally though it was because the layout was so big 600 ft of track. But the zone / sections…

National Garden Railroad Convention (NGRC)

I spent this week learning about what I don’t know about garden railroads. I am in the San Fransisco Bay Area (specifically Santa Clara, CA) attending the NGRC convention.  There are about 1200 attendees this week.  The mornings start off visiting 5-7 layouts at people’s houses and the afternoons typically at clinics to learn how…

Learning JMRI

Since all of my electronics were performing correctly it was now time to determine how to automate the processes.  I have selected JMRI which is a Java based open system that connects to model railroads.  As I have talked about previously I have standardized on Digitrax and I have connected my computer running JMRI to the…

Test the Electronics

I finally got the first phase of the track, signals, and turnouts wired up. I was able to test out each of the boards. I had trouble with the BDL186 showing the occupied blocks. After a lot of checking I noticed the green network light was not behaving as the other circuit boards did. This…

Visit to Fatima

During our visit to Portugal we also had the chance to visit Fatima.  It is very close where Renato’s home town.  I was surprised to see how big the area was and there were so many people.  Nana Sue has been there before and she said that the entire square was filled.  You can see…